【求助】关于potel 3D 转换 出错问题

Into

好不容易画好第一块板子图
! t' E1 t3 c7 |1 M0 K$ c转换3D的时候总是出现  一个窗口  点了确定才能浏览3D图  我一个一个单词翻译出来以后  感觉好像是在讲我什么界线错误的  实在弄不懂  希望大家指教
! V4 V7 P7 Q% f0 O# g
3 O1 i" e( k- S: U! rBoard boundary is incomplete -  calculated boundary will be used , check that the boundary on the keep out layer is closed , with track ends touching at their centers.

ljdx

简单的说就是板边没有闭合了，检查下板子的禁止布线层吧